11 41 Oil pump with strainer and motor
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - OIL PUMP WITH STRAINER AND MOTOR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Intake manifold to oil pump | S63T 0 | M6x14 | 10 Nm | |
| 2AZ | Oil pump to upper oil sump section | S63T 0 | M8x90 M8x70 |
24 Nm | |
| 3AZ | Sprocket to oil pump | S63T 0 | M10 | ||
| Joining | 20 Nm | ||||
| Angle of rotation | 40 ° | ||||
| 4AZ | Chain tensioner to upper oil sump section | S63T 0 | M6x14 | 10 Nm | |