11 41 Oil pump with strainer and motor
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - OIL PUMP WITH STRAINER AND MOTOR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Intake manifold to oil pump | N63O1 | M6 | 10 Nm | |
| 2AZ | Oil pump to bearing cap | N63O1 | M8 | 24 Nm | |
| 3AZ | Oil pump cover to housing | N63O1 | M6 | 10 Nm | |
| 4AZ | Sprocket to oil pump | N63O1 | M10 | Important - left-hand thread | |
| 1. Jointing torque | 20 Nm | ||||
| 2. Angle of rotation | 40 ° | ||||
| 5AZ | Oil pump sprocket to hub | N63O1 | M6 | 10 Nm | |
| 6AZ | Oil deflector to oil pump | N63O1 | M6 | 10 Nm | |