11 61 Intake plenum
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - INTAKE PLENUM
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ |
Suction module to cylinder head |
S63T 0 |
M7x35 |
|
15 Nm |
| 2AZ |
Charging pressure sensor to suction module |
S63T 0 |
Ejot PT50x16 |
|
3.7 Nm |
| 3AZ |
Hose clamp to charge air line |
S63T 0 |
L83-90
L60-80 |
|
3 Nm |