11 12 Cylinder Head And Cylinder Head Cover
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - CYLINDER HEAD AND CYLINDER HEAD COVER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Cylinder head bolt | N63 | M11 x 1.5 | Replace screws. with part number 7 582 454 | |
| Jointing torque | 30 Nm | ||||
| 1. Angle of rotation | 90 ° | ||||
| 2. Angle of rotation | 90 ° | ||||
| 1AZ | Cylinder head bolt | N63 | M11 x 1.5 | Renew screws with part number: 7 607 557 | |
| Jointing torque | 30 Nm | ||||
| 1. Angle of rotation | 90 ° | ||||
| 2. Angle of rotation | 140 ° | ||||
| 2AZ | Cylinder head bolt | N63 | M8 | 23 Nm | |
| 3AZ | Cylinder head cover to cylinder head. | N63 | M6 | 10 Nm | |
| 4AZ | Metal bracket to cylinder head. | N63 | M6 x 16 | 8 Nm | |
| 5AZ | Lifting eye to cylinder head. | N63 | M8 | 20 Nm | |
| 6AZ | Ignition coil cover to cylinder head cover. | N63 | M6 x 20 | 4 Nm | |
| 7AZ | Non-return valve | N63 | M14 x 1.5 | 20 Nm | |
| 8AZ | Vent connection | N63 | M8 x 1 | Replace sealing ring. | 15 Nm |
| 9AZ | ASA screw (2 x) Oil filler neck to cylinder head cover. |
N63 | M6 x 20 | Replace sealing ring. | 10 Nm |
| 10AZ | Connecting branch crankcase ventilation | N63 | M6 x 18 | 10 Nm | |
| 11AZ | Engine ventilation to cylinder head cover | N63 | M6 x 20 | Replace screws | 10.5 Nm |