11 51 Coolant pump
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - COOLANT PUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Coolant pump to gear case. | N63O1 | M6x25 M6x70 M6x90 |
Replace gasket. | 10 Nm |
| 2AZ | Coolant temperature sensor to coolant pump. | N63O1 | M12 x 1.5 | 13 Nm | |
| 3AZ | Supplementary coolant pump to bracket. | N63O1 | K3.5x20 | 1.5 Nm | |
| 4AZ | Pre-feed tube to coolant pump | N63O1 | M6 | Replace screw | 10 Nm |