11 14 Housing covers
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - HOUSING COVERS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Jump guard to crankcase cover | S63T 0 | M6x25 | 10 Nm | |
| 2AZ | Gear case cover to crankcase, bottom | S63T 0 | M8x45 M8x55 M8x65 M8x85 |
24 Nm | |
| 3AZ | Gear case cover to top of cylinder head, left and right | S63T 0 | M6x20 | 10 Nm | |
| 4AZ | End cover (oil) to crankcase (transmission side) | S63T 0 | M6x30 | Observe tightening sequence. | 10 Nm |
| 5AZ | End cover (water) to crankcase (transmission side) | S63T 0 | M6x18 | Observe tightening sequence. | 11 Nm |