18 20 Exhaust system suspension
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST SYSTEM SUSPENSION
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust system to transmission | N63 B44 O 0/N63 B40 O 1/N63 B44 O1 | M8 | 21 Nm | |
| 2AZ | Exhaust system to transfer case | N63 B44 O 0/N63 B40 O 1/N63 B44 O1 | M8 | 21 Nm | |
| 3AZ | Exhaust system to rear axle final drive | N63 B44 O 0/N63 B40 O 1/N63 B44 O1 | M8 | 22 Nm | |
| 4AZ | Retaining plate with rubber mount to rear axle final drive | N63 B44 O 0/N63 B40 O 1/N63 B44 O1 | M12 nut | 35 Nm | |
| 5AZ | Rear silencer to body | N63 B44 O 0/N63 B40 O 1/N63 B44 O1 | M8 Nut/M8 ASA screw | 21 Nm | |
| 6AZ | Reinforcement plate to body | N63 B44 O 0/N63 B40 O 1/N63 B44 O1 | M8 | 21 Nm | |
| 7AZ | Metering pump to reinforcement plate | N63 B44 O 0/N63 B40 O 1/N63 B44 O1 | M6 | 10 Nm | |