18 31 Exhaust system
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST SYSTEM
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust system to catalytic converter | N63 B44 O 0 | nut M8 | 20 Nm | |
| N63 B40 O 1/N63 B44 O 1 | Clamp | 55 Nm | |||
| 2AZ | Exhaust manifold to cylinder head | N63 B44 O 0 | nut M8 | 15 Nm | |
| 3AZ | Heat shield to cylinder head | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| 4AZ | Clamp to exhaust manifold | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M8 | 23 Nm | |