18 32 Catalytic converter
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - CATALYTIC CONVERTER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Catalytic converter to turbocharger | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | V-clamp | Renew V-clamp. | 13 Nm |
| 2AZ | Catalytic converter holder, inlet funnel to cylinder head | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M8 | 21 Nm | |
| 3AZ | Catalytic converter to cylinder head | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M8 | 21 Nm | |
| 4AZ | Catalytic converter to holder | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M8 | 21 Nm | |