84 31 020 Removing and installing/replacing hands-free system speaker (emergency loudspeaker)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Disconnect connector (1).

If necessary, loosen cable straps from latch mechanisms (2).

Unlock latch mechanisms (2).

Remove speaker (3) from bracket.

Installation note:

Latch mechanisms (2) must not be damaged.

Guide lugs of the bracket must be positioned in the corresponding grooves of the speaker (3).

Speaker (3) must audibly engage in the bracket.

Fig 1: Identifying Speaker, Connector, And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.