84 10 800 Removing and installing Combox

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTRICAL DAMAGE (ESD PROTECTION) .

NOTE: Comply with notes and instructions on HANDLING OPTICAL FIBRE .

Necessary preliminary work:

Unscrew nuts (1).

Release screw (2).

Remove the holder with Combox (3) from the body.

Fig 1: Identifying TCB Holder, Screw, And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws on Combox (2).

Unlock plug connections (1) and disconnect.

Remove Combox (2).

Fig 2: Identifying Combox Screws And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Note color coding of plug connections (1).

Replacement:

For vehicles with Teleservices optional equipment: