84 10 700 Removing and installing/replacing base plate

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Necessary preliminary tasks:

F12/F13 only:

Carefully lever out base plate (1) with special tool 00 9 340 /00 9 341.

Fig 1: Removing Base Plate Using Special Tool 00 9 340

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Remove base plate.

Installation note:

Ensure correct cable routing.

Fig 2: Identifying Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.