41 35 Side Panels
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - SIDE PANELS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Front side wall to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F25/F26 | M6x12 | 7.6 Nm | |
| 2AZ | Front side wall to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13 | Hexagon head tapping screw ST6.3x13 |
7.6 Nm | |
| Sheet metal nut ST 6.3 | 7.6 Nm | ||||
| 3AZ | Side deformation element holder (plastic) to wheel arch support | F15/F16/F85/F86 | M6x48 | 8 Nm | |
| 4AZ | Top deformation element holder (plastic) to support | F15/F16/F85/F86 | M6x16 | Renew screws | 8 Nm |
| 5AZ | Front side panel to bumper | F15/F16/F85/F86 | M6x16 | Renew screws | 8 Nm |
| 6AZ | Front side panel to top center deformation element holder (metal) | F15/F16/F85/F86 | M6x20 | 8 Nm | |
| 7AZ | Front side panel to holder, windscreen area | F15/F16/F85/F86 | M6x16 | Renew screws | 8 Nm |
| 8AZ | Front side wall to body Area, A-pillar |
F15/F16/F85/F86 | M6x16 | Renew screws | 8 Nm |
| 9AZ | Front side panel to body, sill area | F15/F16/F85/F86 | Sheet metal screw ST4.8x19 |
Renew screws | 2.5 Nm |
| 10AZ | Front side panel to deformation element holder (plastic) | F15/F16/F85/F86 | M6x20 | 8 Nm | |
| 11AZ | Front side panel to deformation element holder (plastic) | F15/F16/F85/F86 | M6x35 | 8 Nm | |
| 12AZ | Pennant holder retaining plate to carrier support | F15 | M6x20 | 8 Nm | |
| 13AZ | Pennant holder retaining plate to front side panel | F15 | Sheet metal screw | 2.5 Nm | |
| 14AZ | Adapter plate to pennant holder retaining plate | F15 | Self-locking nut | Replace nut | 6 Nm |