41 51 Front door
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - FRONT DOOR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Hinge bolt | F01/F02/F04 | M10 x 56 | 25 Nm | |
| 1AZ | Screw for hinge halves | F07/F10/F11/F12/F13/F06 | M8 | 30 Nm | |
| 1AZ | Nut for hinge halves | F25/F26/F15/F16/F85/F86 | M8 | 27 Nm | |
| 2AZ | Door hinge to door | F01/F02/F04/F07/F10/F11/F12/F13/F25/F26/F06/F15/F16/F85/F86 | Countersunk screw, M8 x 28 | 20 Nm | |
| 2AZ | Door hinge to door | F03 | Countersunk screw, M8 x 28 | 35 Nm | |
| 3AZ | Door hinge to body | F01/F02/F04/F07/F10/F11/F12/F13/F25/F26/F06/F15/F16/F85/F86 | Hexagon screw with taper, M12 x 36 | 66 Nm | |
| 4AZ | Door plug connection to body | F01/F02/F04/F07/F10/F11/F12/F13/F25/F26/F06/F15/F16/F85/F86 | M5 x 16 | 3 Nm | |