41 61 Engine compartment lid
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE COMPARTMENT LID
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Engine compartment lid to hinge | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13 | M8 | 20 Nm | |
| 2AZ | Hinge upper section to hinge lower section | F01/F02/F03/F04/F06/F07/F10/F11 | M8 | 18.5 Nm | |
| 3AZ | Hinge lower section to body to 09/2010 | F01/F02/F03/F04/F06/F07/F10/F11 | M8 | 20 Nm | |
| 3AZ | Hinge lower section to body, rear screw connection, from 10/2010 | F01/F02/F03/F04/F06/F07/F10/F11 | M8, Strength class 10.9 | 28 Nm | |
| 3AZ | Hinge to body | F12/F13 | M8, Strength class 10.9 | 28 Nm | |
| 4AZ | Actuator to hinge upper section | F01/F02/F04/F06/F10/F11 | M8 x 45 | 17 Nm | |
| 5AZ | Actuator to holder | F01/F02/F04/F06/F10/F11 | M8 x 24 | 17 Nm | |
| 6AZ | Holder to hinge lower section | F01/F02/F04/F06/F10/F11 | M8 x 14 | 18.5 Nm | |
| 7AZ | Holder, damper to hinge upper section | F01/F02/F04/F06/F10/F11 | M8 x 14 | 18.5 Nm | |
| Engine compartment lid with active pedestrian protection (from 04/11): | |||||
| 8AZ | Actuator to holder | F01/F02/F04/F06/F10/F11/F12/F13/F18/F34 | M6 x 16 | 7.6 Nm | |
| 9AZ | Lever to hinge, left | F01/F02/F04/F06/F10/F11/F12/F13/F18 | M8 | 23 Nm | |
| 10AZ | Lever to hinge, right | F01/F02/F04/F06/F10/F11/F12/F13/F18 | M8 |
IMPORTANT:
Left-hand threads.
|
23 Nm |