LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 67 (Propeller Shaft - Repair - F13) >> Propeller Shaft >> 26 Additional work on four-wheel drive vehicles after driving with defective (non-engaging) drive

26 Additional work on four-wheel drive vehicles after driving with defective (non-engaging) drive

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: If the vehicle has been moved under engine power with a non-engaging drive system (e.g. front propeller shaft defective and no longer engaging with the front differential or 1 output shaft no longer engaging with drive flange), it is imperative that the transfer box is calibrated after repairing the propeller shaft/output shaft(s).

After completing repairs, perform calibration using BMW diagnosis and information system and selecting Control unit function - Function check - Transfer box.

scientia non olet · About LEMON Manuals