22 32 050 Replacing cross-member for transmission mounting (N63, Automatic) - AWD

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release screws (1).

Remove cover (2).

Fig 1: Identifying Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Tightening torque 22 32 3AZ .

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nut (1).

Tightening torque 22 32 6AZ .

Pull out screw (2).

Move transmission cross member (3) in direction of arrow and remove screw (2).

Remove transmission cross-member.

Fig 3: Identifying Transmission Cross Member, Screw And Nut

Courtesy of BMW OF NORTH AMERICA, INC.