13 62 Sensors for control unit
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - SENSORS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Coolant temperature sensor | S63 B44 T 0 | M12x1.5 | 16 Nm | |
| 2AZ | Pressure sensor to intake plenum | S63 B44 T 0 | K50x14 | 3 Nm | |
| 3AZ | Camshaft sensor to cylinder head | S63 B44 T 0 | M6 | 8 Nm | |
| 4AZ | Crankshaft sensor to transmission | S63 B44 T 0 | M6 | 8 Nm | |
| 5AZ | Knock sensor to crankcase | S63 B44 T 0 | M8 | 21.5 Nm | |
| 6AZ | Hot film air mass meter to upper section of intake filter housing | S63 B44 T 0 | K50x16 | 2 Nm | |
| 7AZ | Pressure sensor to intercooler | S63 B44 T 0 | M6 | 3 Nm | |