13 62 Sensors for control unit
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - SENSORS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Camshaft sensor to cylinder head | N55/N55 Hybrid | M6x16 | 8 Nm | |
| 2AZ | Connector housing, crankshaft sensor, to crankcase | N55/N55 Hybrid | M6x16 | 8 Nm | |
| 3AZ | Knock sensor to crankcase | N55/N55 Hybrid | M8x30 | 21.5 Nm | |
| 4AZ | Pressure sensor to intake plenum | N55/N55 Hybrid | 4 Nm | ||
| 5AZ | Coolant temperature sensor | N55/N55 Hybrid | 13.5 Nm | ||
| 6AZ | Cable channel to engine block | N55/N55 Hybrid | M6 | 8 Nm | |
| 7AZ | Oil temperature sensor to engine block | N55/N55 Hybrid | 15 Nm | ||
| 8AZ | Crankshaft sensor to crankcase | N55/N55 Hybrid | 5 Nm | ||