13 71 Air intake system
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - AIR INTAKE SYSTEM
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Intake silencer housing to holder | S63 B44 T 0 | M6 | 8 Nm | |
| 2AZ | Intake filter housing to clean-air pipe | S63 B44 T 0 | Hose clamp | 3 Nm | |
| 3AZ | Intake filter housing upper section to intake filter housing lower section | S63 B44 T 0 | 3.3 Nm | ||
| 4AZ | Clean air pipe to exhaust turbocharger | S63 B44 T 0 | M6 | 10 Nm | |
| 5AZ | Air ducts to holder | S63 B44 T 0 | M6 | 10 Nm | |
| 6AZ | Intercooler to engine | S63 B44 T 0 | M6 | 10 Nm | |
| 7AZ | Hose to throttle valve | S63 B44 T 0 | Screw clamp | 4 Nm | |