13 71 Air intake system
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - AIR INTAKE SYSTEM
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Clean air pipe to exhaust turbocharger | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| 2AZ | Intake filter housing to clean-air pipe | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | Hose clamp | 3 Nm | |
| 3AZ | Carrier plate, cylinder 1-4 to cylinder head cover |
N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| 4AZ | Carrier plate, cylinder 5-8 to cylinder head cover |
N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| 5AZ | Carrier plate for acoustic cover | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 Snaploc bolt | 10 Nm | |
| 6AZ | Intercooler to engine | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| 7AZ | Hose to throttle valve | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | Screw clamp | 3.5 Nm | |
| 8AZ | Hose to exhaust turbocharger | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | V-band clamp | 3.5 Nm | |