51 75 Underbody panelling
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - UNDERBODY PANELLING
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Underbody panelling on body | F-series | Bolt, non-metric thread | 3 Nm | |
| Screw M6 | 8.8 Nm | ||||
| Nut | 2.5 Nm | ||||
| 2AZ | Wheel arch cover to body | F-series | Screw | 3 Nm | |
| Nut | 2.6 Nm | ||||
| 3AZ | Underbody protection front | F18 National-market version | M8x33 | Replace screw | 28 Nm |
| M10x35 | Replace screw | 28 Nm | |||