51 12 Rear bumper
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - REAR BUMPER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Support to body | F01/F02/F03/F04/F06/F12/F13 | M12 | Replace nuts | 66 Nm |
| F07/F10/F11/F18 | M12 | Replace nuts | 108 Nm | ||
| F25/F26 | 68 Nm | ||||
| 2AZ | Guide, middle rear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | Replace nuts | 4 Nm | |
| F25/F26 | Replace nuts | 4.5 Nm | |||
| 3AZ | Guide, side, to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | Replace nuts | 4.5 Nm | |
| Screw | 3 Nm | ||||
| 4AZ | Trailer tow hitch to bumper support | ||||
| 5AZ | Bumper trim panel to side fixture | F07/F10/F11/F18 | 2 Nm | ||
| F25/F26 | 2.5 Nm | ||||
| 6AZ | Bumper trim panel to rear light housing | F07/F25/F26 | 4.5 Nm | ||
| F06/F10/F11/F12/F13/F18 | 2 Nm | ||||
| 7AZ | Bumper trim panel to lower center fixture | F07/F10/F11/F18 | 4.5 Nm | ||
| 8AZ | Rear silencer holder | F07/F10/F11/F12/F13/F18 | Nut | 21 Nm | |
| 9AZ | Cover on body | F25/F26 | Nut | 5 Nm | |
| 10AZ | Bottom guide to luggage compartment floor | F10 M5 | 4 Nm | ||