51 44 Headlining
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - HEADLINING
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Holder, roofliner to roof | F02/F04 | Replace screws | 4 Nm | |
| 2AZ | Roofliner to C-pillar trim cover holder | F06/F13 | 2.3 Nm | ||
| 3AZ | Headlining frame to body, front | F06/F13 | 1.8 Nm | ||
| 4AZ | Roofliner to front panorama glass roof | F15 | 1.5 Nm | ||