67 61 007 Removing and installing (replacing) electric motor with gearbox (rear) for glass tilt sunroof

Necessary preliminary tasks: 

• Lower HEADLINING

Disconnect plug connection (2) and if necessary expose cable.

Release screws (1) and remove electric motor (3).

Tightening torque 54 13 1AZ .

Fig 1: Identifying Electric Motor Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Engage gear (1) of electric motor (2) exactly in gearing (3).

Fig 2: Identifying Electric Motor Gear And Teeth

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Initialize GLASS TILT SUNROOF .