67 31 540 Removing and installing/replacing backrest upper section adjustment motor
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Remove the backrest cover from the front seat. See DRIVER'S SEAT BACKREST COVER (NORMAL/ELECTRIC) , FRONT PASSENGER SEAT BACKREST COVER (NORMAL/ELECTRIC) , DRIVER'S SEAT BACKREST COVER (SPORT) , or FRONT PASSENGER SEAT BACKREST COVER (SPORT) .
Unfasten plug connection (1) and disconnect.
Unfasten screws (2).
Tightening torque 67 31 4AZ .
Remove the powertrain (3) from the gearbox.
NOTE:
- Carry out FUNCTION CHECK WITH ADAPTER CABLE
- INITIALIZE the drive for backrest upper section adjustment