34 33 Brake servo
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - BRAKE SERVO
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Brake booster to pedal assembly console | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M8 | Replace self-locking nut. Retighten on brake booster after 10 min. |
24 Nm |
| 2AZ | Electric vacuum pump holder to oil sump | F01h/F02h/F10h | M10 | 38 Nm | |
| 3AZ | Electric vacuum pump to bracket | F01h/F02h/F10h/F18PHEV | M6 | 9 Nm | |