63 99 437 Replacing light bulb for footwell light

WARNING: This page is about a different variant/trim than selected.

WARNING: Follow instructions for handling light bulbs (INTERIOR LIGHTS) .

Necessary preliminary tasks:

Turn bulb holder (1) in direction of arrow and pull out of footwell light (2).

Installation note:

Make sure bulb holder (1) is correctly seated and latched on footwell light (2).

Fig 1: Turning Bulb Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Pull bulb (1) in direction of arrow out of bulb holder (2).

Fig 2: Pulling Bulb Out Of Bulb Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

NOTE: LED technology lights can only be replaced completely.