63 10... Adjust the low-beam headlight (with electronic headlight adjustment device MAHA Lite 3)
Comply with PREREQUISITES FOR HEADLIGHT ADJUSTMENT .
Refer to the manufacturer's operating instructions for the headlight adjustment device.
Only in the event of a customer complaint regarding dazzle/glare Adjust anti-glare high-beam headlight separately.
Switch on the headlight adjustment device by pressing any button.
Press F2 button. The shown display screen appears.
Perform the following settings:
- Passenger car must be selected
- Enter the setting dimension of the headlight via the buttons F1/F2: - 1, 0 % to - 1, 1 %
(see "light/dark boundary of the headlight in the headlight adjustment device" in PREREQUISITES FOR HEADLIGHT ADJUSTMENT ).
- The right/left-hand traffic must be selected according to the country.
- Select the headlight type via the button F3
:
- EC : for halogen and xenon headlights
- EC LED : for LED headlight
The adjusted values are adopted for future measurements.
An incorrect selection leads to an incorrect setting.
Transparent screen Type I:
Press briefly the button for the applicable side of the vehicle (3) until symbol (1) appears.
Transparent screen Type II :
Press longer the button for the applicable side of the vehicle (3) until symbol (4) appears.
The following symbols appear in the display:
- O. K. (2): Adjustment is optimal.
- O. K. (5): Adjustment is within the legal tolerance range. ADJUST HEADLIGHT until O. K. (2) is displayed.
- Arrows (6): Adjustment is incorrect. ADJUST HEADLIGHT using arrows (6) until O. K. (2) is displayed.