63 11... Replace left turn indicator LED module

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

NOTE: For a better overview the removed condition is shown here.

Release screws (1).

Tightening torque 63 11 2AZ .

Remove LED module (2).

Fig 1: Identifying LED Module Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect the connector (1).

Remove LED module (2).

IMPORTANT: Risk of damage due to moisture penetration.

Installation note:

Gasket (3) on LED module (2) must not be damaged or missing.

Fig 2: Identifying LED Module Gasket And Connector

Courtesy of BMW OF NORTH AMERICA, INC.