63 11... Installing headlight repair kit

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary work:

NOTE: Damaged holders (1, 2, 3) can be replaced with the repair kit.
Replacement of headlight is not required.

Fig 1: Identifying Damaged Holders

Courtesy of BMW OF NORTH AMERICA, INC.

Holder 1 from first image:

Remove the damaged holder (1) as shown.

Fit holder from repair kit (2) and secure with screws (3).

Slide clamp (4) onto holder (2).

Holders 2 and 3 from the first image:

Remove the damaged holder (5) as shown.

Fit holder from repair kit (6) and secure with screws (8).

Slide clamp (7) onto holder (6).

After installation:

Fig 2: Replacing Holders

Courtesy of BMW OF NORTH AMERICA, INC.