63 17 075 Removing and installing/replacing right front fog light

WARNING: This page is about a different variant/trim than selected.

NOTE: The time value of this job item does not include adjustment of the fog lights.

Necessary preliminary tasks:

Unfasten plug connection (1) and disconnect.

Remove cable clip (2).

Release screws (3).

Tightening torque 63 12 7AZ .

Remove fog lamp.

Fig 1: Identifying Cable Clip, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

On replacement of fog light or bumper panel at front: