63 14 120 Removing and installing or replacing rear reflector

WARNING: This page is about a different variant/trim than selected.

Special tools required:

00 9 327

NOTE: Illustrations depict removal of left rear reflector. The rear reflector is removed in the same manner. The graphics show a mirrored image of the situation.

Carefully unclip the rear reflector (1) with the special tool 00 9 327 as shown.

Detach the rear reflector (1) from the bumper panel (2).

Fig 1: Removing Rear Reflector Using Special Tool 00 9 327

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clamps (1) must not be damaged or missing.

Make sure rear reflector (2) is correctly seated.

Fig 2: Identifying Rear Reflector And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.