63 25 000 Removing and installing/replacing auxiliary brake light

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary work:

Disconnect plug connection (1).

Unfasten screws (2).

Fig 1: Identifying Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release latch mechanism (1) on left and right of auxiliary brake light (2).

Remove auxiliary brake light (2).

Fig 2: Identifying Latch Mechanism On Auxiliary Brake Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Seal (1) on the additional brake light must not be damaged or missing.

Fig 3: Identifying Seal On Auxiliary Brake Light

Courtesy of BMW OF NORTH AMERICA, INC.