LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Collision - Body Panel Repair (F13)) >> Body Repair General Information >> 41 00... Grinding Steel Parts

41 00... Grinding Steel Parts

WARNING: This page is about a different variant/trim than selected.
  1. 1.0 Recommended tools and equipment 
    • Tools are recommended for manual grinding work.
    • Machines/equipment are recommended for machine grinding work.

    See also BMW Aftersales Assistance Portal (ASAP) - Service/Technology - Workshop Equipment (Start BMW) - Shop Workshop Equipment

  2. 2.0 Grinding outer shell and structure 

    Always replace abrasives which have already been used to treat aluminum (risk of corrosion).

    Do not grind the material thin.

scientia non olet · About LEMON Manuals