232050 - Puller AM

WARNING: This page is about a different variant/trim than selected.

NOTE: (Rillex ball bearing puller 6205) For pulling out the grooved ball bearing from the transmission countershaft and the transmission output shaft

Consisting of:

0491550 Claw
NOTE: (Claw for Rillex 6305 (8 pieces))

Fig 1: Identifying Puller (232050)
Courtesy of BMW OF NORTH AMERICA, INC.
0491551 Holding sleeve
NOTE: (Union sleeve)
0491552 Spindle
NOTE: (Pressure spindle)