232000 - Puller AM

WARNING: This page is about a different variant/trim than selected.

NOTE: (Rillex ball-bearing extractor 6206) 9 ball bearings with steel cage - For pulling out the grooved ball bearing of the transmission drive shaft

Consisting of:

0491537 Claw
NOTE: (Claw for Rillex 6206 (9 x))
0491538 Holding sleeve
NOTE: (Union sleeve)
0491539 Spindle
NOTE: (Pressure spindle)

Fig 1: Identifying Puller (232000)
Courtesy of BMW OF NORTH AMERICA, INC.