SI number

WARNING: This page is about a different variant/trim than selected.

01 22 97 (239)

Fig 1: Identifying Device (242310)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

0493157 Plate
NOTE: (Pressure plate) For removing and installing the spring cup
0493158 Spindle
NOTE: (Spindle with pressure plate) Spindle M14x1.5, nut M14, pressure plate and washer/For removing and installing the spring cup
0493159 Pin
NOTE: (Guide pin (2 pieces)) For fixing the gaskets and the intermediate plate on the intermediate case
0493160 Bush
NOTE: (Slip bush) For installing the piston in the cylinder of the intermediate plate