24 51 External shift linkage
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - EXTERNAL SHIFT LINKAGE
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Selector lever to transmission | GA6HP19Z/GA6HP26Z/GA6 HP32Z | M8x1 | 10 Nm | |
| 2AZ | Nut to pipe clamp | GA6HP19Z/GA6HP26Z/GA6HP32Z/GA8HP45Z/GA8HP70Z/GA8HP90Z | 5 Nm | ||
| 3AZ | Release lever to transmission | GA8HP45Z/GA8HP70Z/GA8HP90Z | M6 | 6.5 Nm | |
| 4AZ | Retaining bracket to transmission | GA8HP45Z/GA8HP70Z/GA8HP90Z | M6 | 6.5 Nm | |