23 11 Case and Cover
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - CASE AND COVER
| |
Type |
Thread |
Tightening specification |
Measure |
| 16AZ |
Holder to transfer case |
265/Sport |
M6 |
|
9 Nm |
| 17AZ |
Retaining plates for bearings on housing |
S5D 310Z/S5D 320Z/S5D 200G/S5D 250G |
M6 |
|
10 Nm |
| 18AZ |
Retaining plate to housing |
S5D 320Z SMG |
M6 |
|
5.5 Nm |