SI number

WARNING: This page is about a different variant/trim than selected.

01 05 90 (207)

Consisting of:

1 = 0492265/ 333211 Bush
NOTE: For accommodating the engine support arm or wheel carrier when pressing out the ball joint
2 = 0492266/ 333212 Synchronizing key
NOTE: For pressing the ball joint out of the engine support arm or wheel carrier
3 = 0492267/ 333213 Holding sleeve
NOTE: (Spacer sleeve) For pressing the ball joint into the support arm
3 = 0492268/ 333214 Holding sleeve
NOTE: (Spacer sleeve) For pressing the ball joint into the wheel carrier

Fig 1: Press-Out/-In Tool Set (333210)
Courtesy of BMW OF NORTH AMERICA, INC.