331350 - Device AM

WARNING: This page is about a different variant/trim than selected.

NOTE: For removing and installing outer rings of taper roller bearings

Consisting of:

1 = 0492114/ 331351 Shaped part
NOTE: (Shaped part)
2 = 0492115/ 331352 Spindle
NOTE: (Spindle, short)
4 = 0492116/ 331354 Nut
Note:
5 = 0492117/ 331355 Washer
NOTE: (Installation washer (2 pieces))
6 = 0492118/ 331356 Bridge
NOTE: (Support bridge)
7 = 0492119/ 331357 Washer
NOTE: (Thrust washer)
8 = 0492120/ 331358 Holding sleeve
NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127.

Fig 1: Identifying Device (331350)
Courtesy of BMW OF NORTH AMERICA, INC.