Storage Location

WARNING: This page is about a different variant/trim than selected.

Consisting of:

1 = 0492097/ 331301 Connector
NOTE: (Basic body) For transmissions S5D 260Z, S5D 310Z and S5D 320Z;Discontinued, only available via complete tool
2 = 0492098/ 331302 Washer
NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
3 = 0492099/ 331303 Washer
NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
4 = 0492100/ 331304 Washer
NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
5 = 0492101/ 331305 Synchronizing key
NOTE: (Thrust piece (old)) Discontinued, only available via complete tool

Fig 1: Identifying Extractor (331300)
Courtesy of BMW OF NORTH AMERICA, INC.
6 = 0492102/ 331306 Synchronizing key
Note:
7 = 0492103/ 331307 Synchronizing key
NOTE: Not available individually. Only via complete tool set
8 = 0492104/ 331308 Synchronizing key
Note:
9 = 0492105/ 331309 Synchronizing key
NOTE: For rear axle differential and for installing the camshaft sprocket on the crankshaft (M70) Discontinued, only available via complete tool
1 = 0492107/ 331311 Washer
NOTE: (Disc) Discontinued, only available via complete tool
2 = 0492108/ 331312 Synchronizing key
NOTE: For pulling the bearing inner race off the drive flange - Series: E36/5 Discontinued, only available via complete tool