66 53 170 Removing and installing/replacing control unit for Top-/Rear-/Side-View Camera

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Release screw (1).

Remove amplifier (2) in direction of arrow.

Fig 1: Removing Amplifier

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (2) and screws (3).

Remove TRSVC control unit (1) including holder.

Fig 2: Identifying TRSVC Control Unit, Nuts And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Replacement:

Unfasten screws (2).

Remove TRSVC control unit (3) from bracket.

Fig 3: Identifying TRSVC Control Unit, Plug Connections And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: