21 21 Clutch Disc and Drive Plate
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - CLUTCH DISC AND DRIVE PLATE
| Type | Thread | Work instruction | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Clutch to flywheel | F06/F10/F11/F12/F13/F18/F20/F21/F22/F23/F25/F26/F30/F31/F32/F33/F34/F36/F80/F82/F83 | M8 10.9 | Replace screws. Jointing torque and angle of rotation must be observed without fail. |
|
| 1. Jointing torque | 15 Nm | ||||
| 2. Angle of rotation | 90 ° | ||||