17 10 Radiator, expansion tank
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - RADIATOR, EXPANSION TANK
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Radiator cover, top | N63 B44 O 0/N63 B40 O1/N63 B44 O 1/N74 | 5 Nm | ||
| 2AZ | Expansion tank to body | N63 B44 O 0/N63 B40 O1/N63 B44 O 1/N74 | M6 | 10 Nm | |
| 3AZ | Transmission oil heat exchanger to holder | N63 B44 O 0/N63 B40 O1/N63 B44 O 1/N74 | 5 Nm | ||
| 4AZ | Thermostat insert to transmission oil heat exchanger | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 6 Nm | |
| 5AZ | Coolant hoses to fan cowl | N63 B44 O 0/N63 B40 O1/N63 B44 O 1/N74 | 5 Nm | ||
| 6AZ | A/C lines to A/C condenser | N63 B44 O 0/N63 B40 O1/N63 B44 O 1/N74 | M6 | 8 Nm | |
| 7AZ | Expansion tank for charge air cooler to holder | N63 B44 O 0/N63 B40 O1/N63 B44 O 1/N74 | M6 | 4 Nm | |
| 8AZ | Expansion tank for charge air cooler to holder | N74 | M6 | 10 Nm | |
| 9AZ | Holder to cooling loop for hydraulic steering | N63 (ALPINA) | 4 Nm | ||
| 10AZ | Holder for module carrier | N63 B44 O 0/N63 B40 O1/N63 B44 O 1/N74 | 10 Nm | ||