17 22 Engine oil cooler lines and transmission oil cooler lines
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE OIL COOLER LINES AND TRANSMISSION OIL COOLER LINES
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission oil cooler line to transmission | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M8 | 21 Nm | |
| 2AZ | Holder, transmission oil cooler line, to front axle support | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 8 Nm | |
| 3AZ | Transmission oil cooler line to holder | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| 4AZ | Engine oil cooler line to oil sump thermostat | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M8 | 21 Nm | |
| 5AZ | Engine cooler line to holder, front axle support and oil sump | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| 6AZ | Holder, engine oil cooler line, to front axle support | N54/N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 8 Nm | |
| 7AZ | Holder, engine oil cooler line, to oil sump | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| 8AZ | Engine oil cooler to holder | N54/N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| 9AZ | Transmission oil line to transmission oil heat exchanger | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 8 Nm | |