51 16 041 Removing and installing/replacing cover cap on left or right exterior mirror

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Necessary preliminary tasks:

Unlock protective cap at latch mechanisms (2) using suitable tool (1).

Fig 1: Unlocking Protective Cap At Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Secure cover cap (2) against falling off.

Unlock latch mechanisms (1) between protective cap (2) and retaining ring (3) with special tool 00 9 317 .

Carefully pull up protective cap (2) and remove.

Fig 2: Unlocking Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Catches (1) and guides (2) on cover cap (3) must not be damaged.

Fig 3: Identifying Catches And Guides On Cover Cap

Courtesy of BMW OF NORTH AMERICA, INC.