51 71 039 Removing and installing/replacing front left or right wheel arch cover (rear section)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

NOTE: For a better view surrounding components have been omitted.

Prior to removing, pay attention to the exact installation position with respect to the adjoining components.

Release all screws (3).

Release expanding rivets (2) and (4).

Remove the cover of the wheel arch (1).

Installation note:

Renew expanding rivets (2).

Fig 1: Identifying Wheel Arch Cover, Screws, And Expanding Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Ensure wheel arch cover (1) is correctly seated.