51 11... Removing and installing/replacing chrome strip in bumper panel (side)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Necessary preliminary work:

Release all retaining lugs on chrome strip (1) with special tool 64 1 020 .

Fig 1: Releasing Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Release latch mechanisms (1) and remove chrome strip towards front.

Fig 2: Identifying Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs (1) and (2) on chrome strip (3) must not be damaged or missing.

Fig 3: Identifying Retaining Lugs On Chrome Strip

Courtesy of BMW OF NORTH AMERICA, INC.